Tell me about A32. What does it fix? Why isn't it on the website?


--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A31 (Linux)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:100/107)

On 04/30/17, Nugax pondered and said...

Tell me about A32. What does it fix? Why isn't it on the website?

Have a read back at a few posts I have made about the subject in the last 2-3 weeks and all will be revealed.. you may wish to rescan your message bases :)

* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:100/107)

You AKA is incorrect - it should be 21:1/107 not 21:100/107

Best, Paul

--- Mystic BBS v1.12 A32 (Windows)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

Yea I didn't have messages that far back...

On 07:31 01/05 , Avon wrote:

On 04/30/17, Nugax pondered and said...

Tell me about A32. What does it fix? Why isn't it on the website?

Have a read back at a few posts I have made about the subject in the last 2-3 >weeks and all will be revealed.. you may wish to rescan your message bases :)

* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:100/107)

You AKA is incorrect - it should be 21:1/107 not 21:100/107

Best, Paul

--- Mystic BBS v1.12 A32 (Windows)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A31 (Linux)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

* An ongoing debate between Nugax and All rages on ...

Yea I didn't have messages that far back...

Tell me about A32. What does it fix? Why isn't it on the

website?

=== snip ===

! Fixed a problem in QWK packets that could cause packet corruption when
processing messages greater than 64kb. Thanks to William McBrine for
the report and the fix!

! When processing echomail PKT files, Mystic was not properly reading in
the seconds from the message post date/time, if it was supplied by the
sending mailer. Please note that in some cases, this could invalidate
current duplicate message databases, but this will of course correct
itself over time.

For clarification: QWK and QWKE do not have message seconds so there is
no similar issue on the QWK side.
=== snip ===

.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ | `----------- WildCat! Board 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... Ever notice there's no crime at a shooting range?
--- GoldED+/W32-MSVC v1.1.5-b20170303 ... via Mystic BBS!
* Origin: FSXNet - RPi3B: telnet://cmech.dynip.com:2323 (21:2/117)

You AKA is incorrect - it should be 21:1/107 not 21:100/107

I believe I fixed it.



-Nugax

--- Mystic BBS v1.12 A31 (Linux)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

On 04/30/17, Cmech said the following...

* An ongoing debate between Nugax and All rages on ...

Yea I didn't have messages that far back...

Tell me about A32. What does it fix? Why isn't it on the

website?

=== snip ===

! Fixed a problem in QWK packets that could cause packet corruption when
processing messages greater than 64kb. Thanks to William McBrine for
the report and the fix!

! When processing echomail PKT files, Mystic was not properly reading in
the seconds from the message post date/time, if it was supplied by the
sending mailer. Please note that in some cases, this could invalidate
current duplicate message databases, but this will of course correct
itself over time.

For clarification: QWK and QWKE do not have message seconds so there
is no similar issue on the QWK side.
=== snip ===

Where do I find this? Its not on Mystic website. Is there a Linux build?
I didn't see any Linux Mystics using it.



-Nugax

--- Mystic BBS v1.12 A31 (Linux)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

* An ongoing debate between Nugax and Cmech rages on ...

Where do I find this? Its not on Mystic website. Is there a Linux
build? I didn't see any Linux Mystics using it.

It's a limited distribution pre-alpha build for Windows only. G00r00 should put

something up soon I imagine. Patience {chuckle}


.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ | `----------- WildCat! Board 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... Krushchev credited SPAM with the survival of the WWII Russian army.
--- GoldED+/W32-MSVC v1.1.5-b20170303 ... via Mystic BBS!
* Origin: FSXNet - RPi3B: telnet://cmech.dynip.com:2323 (21:2/117)

Nugax wrote to Avon <=-

You AKA is incorrect - it should be 21:1/107 not 21:100/107

I believe I fixed it.

* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

Yep, you have. :)


... You're actually going to do something. Can I watch?
--- MultiMail/Win32 v0.49
* Origin: Freeway BBS - freeway.apana.org.au (21:1/109)

Got it. Thanks Mech!


On 05:17 03/05 , Cmech wrote:

* An ongoing debate between Nugax and Cmech rages on ...

Where do I find this? Its not on Mystic website. Is there a Linux
build? I didn't see any Linux Mystics using it.

It's a limited distribution pre-alpha build for Windows only. G00r00 should put

something up soon I imagine. Patience {chuckle}

.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ | >`----------- WildCat! Board 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... Krushchev credited SPAM with the survival of the WWII Russian army.
--- GoldED+/W32-MSVC v1.1.5-b20170303 ... via Mystic BBS!
* Origin: FSXNet - RPi3B: telnet://cmech.dynip.com:2323 (21:2/117)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A31 (Linux)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

Hi Avon,

Mystic BBS v1.12 A32 is installed on my Pi and running fine. No abnormal terminations under Raspbian :) just Wins VM. Will wait for A33 to test again on

Windows box :)


.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ | `----------- WildCat! Board 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... If all else fails, eat chocolate and enjoy! ;*)
--- GoldED+/LNX v1.1.5-b20170303 ... via Mystic BBS!
* Origin: FSXNet - Positronium Pi: telnet://cmech.dynip.com:2323 (21:2/117)

On 05/05/17, Cmech pondered and said...

Hi Avon,

Mystic BBS v1.12 A32 is installed on my Pi and running fine. No abnormal terminations under Raspbian :) just Wins VM. Will wait for A33 to test again on
Windows box :)

Coolio Ben.. I have added some tracking logging to my batch file to note if/when my Windows MIS abends - so far no issues.

Best, Paul

--- Mystic BBS v1.12 A32 (Windows)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

* An ongoing debate between Avon and Cmech rages on ...

Coolio Ben.. I have added some tracking logging to my batch file to
note if/when my Windows MIS abends - so far no issues.

I don't log my issues on this glitch, but I have a proc that could if needed?. It checks to see if MIS is running every 5 minutes and auto re-starts if not. It also beeps 3 short tones on restart so I know it's happened. This was occuring 5-6 times a day, too much for me. :(

The only thing I have not tried is moving everything I can to MIS2, except events, and see what happens. Something to ponder, though it seems a bit problematic to me (switching back worries me but I may try anyway with A33).


.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ | `----------- WildCat! Board 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... The emptier the pot, the quicker it boils.
--- GoldED+/W32-MSVC v1.1.5-b20170303 ... via Mystic BBS!
* Origin: FSXNet - RPi3B: telnet://cmech.dynip.com:2323 (21:2/117)

On 05/05/17, Cmech pondered and said...

I don't log my issues on this glitch, but I have a proc that could if needed?. It checks to see if MIS is running every 5 minutes and auto re-starts if not. It also beeps 3 short tones on restart so I know it's happened. This was occuring 5-6 times a day, too much for me. :(

I'm just using this

[snip]

@Echo On

c:
cd\bbs\mystic

:LOOP

MIS
TIMEOUT /T 5
set T=%time:~0,5%
set crash=%date:/=-% %T::=-%
echo Agency MIS restarted - %crash% > restartlog.txt

GOTO LOOP

[snip]

So far nothing has been created in the way of a restartlog.txt file :)

I'll keep an eye on it.

Best, Paul

--- Mystic BBS v1.12 A32 (Windows)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

* An ongoing debate between Avon and Cmech rages on ...

I'm just using this
[snip]
I'll keep an eye on it.

Ok, mine:

=== Cut ===
@Echo off

Cmdow.exe "Mystic Internet Server" /VIS >nul
if not errorlevel 1 goto exit

Cd \mystic
Start Mis.exe
Echo

:exit
=== Cut ===

Windows Scheduled Task is used to run every 5 mins ...


.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ | `----------- WildCat! Board 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... A conscience is what hurts when all your other parts feel so good.
--- GoldED+/W32-MSVC v1.1.5-b20170303 ... via Mystic BBS!
* Origin: FSXNet - RPi3B: telnet://cmech.dynip.com:2323 (21:2/117)